- Company : Yangzhong Haiteng Fluorine Plastic Product Factory
- Region : Jiangsu , China
- Category : Apparel & Clothing > Wedding Apparel
- Specification : Wooden Box with foam lined in safe conditions, as your requirement
- Quantity : 80tons/Month
- Contact Person : Ji Ming|||sales
- Telephone :
- Fax :
- Mobile phone :
- Website : www.plasticptfe.com
- Email : [email protected]
- Update : Jul/20/2018
Product Details
Corrosion Resistant UHMWPE Board for Dock UHMW PE is a kind of engineering plastic with medium price and superior properties. It has almost combines all excellent properties of plastics. It has excellent abrasion resistance, high impact resistance, self-lubricating properties ,outstanding ability against cold ,eco-friendly ,and light weight. Characters Made with 100% virgin UHMWPE which is known for its high quality and cost-effective rates. It is no poison, low temperature tenacity, good twisting endurance, excellent chemical erosion, superficial electrical performance within wide frequency range, etc and more rigid and harder than LDPE(low density PE) materials and is three times better in compressive strength.These sheets are widely used in different applications. Images Properties for UHMWPE Sheet PROPERTIES Test Method Unit Value I.Physical Properties Density ISO 1183 g/cm3 0.96 Water absorption 24hrs ISO 62 % 0.01 II.Thermal Properties Heat deflection temperature - HDT/A ISO 75-2 ºC 42 Min. service temperature ºC -269 Max. service temperature-Long Term ºC 90 Thermal conductivity at 23 ºC DIN 11359 W/(K*m) 0.42 Coefficient of linear thermal expansion ISO 11359 10-4*K-1 2 Flammability Rating(6mm thickness) UL 94 - HB III.Mechanical Properties at 23ºC Tensile strength at yield ISO 527-2 MPa 17 Tensile strength at break ISO 527-2 Mpa 40 Elongation at break ISO 527-2 % >50 Modulus of elasticity after tensile test ISO 527-2 MPa 650 Modulus of elasticity after flexural test ISO 178 MPa 800 Hardness - Shore D DIN 53505 61 Charpy impact strength ISO 179 kJ/m2 N. B. Friction coefficient DIN 53375 0.25 IV.Electrical Properties at 23ºC Dielectric constant at 1 MHz IEC 60250 106Hz 3.1 Dielectric loss factor at 1 MHz IEC 60250 106Hz 0.0001 Volume resistively IEC 60093 Ohm (?) * cm >1014 Surface resisively IEC 60093 Ohm (?) >1011 Dielectric strength IEC 60243-1 kV/mm 4
