12mm RGB LED Module WS2811 Pixel Node Module Light String Addressable DC5V Non-waterproof

• Company : Shenzhen Forever Shining Opto-electronics Co., Ltd. Yga
• Region : Zhejiang , China
• Category : Lights & Lighting > Commercial Lighting Projects
• Specification : Quick DetailsType:LED ModulesEmitting Color:RGBPower:otherColor Temperature:rgbPlace of Origin:Jiangsu, China (Mainland)Brand Name:HDPackaging & DeliveryPackaging Details:1.Good quality carton 2.According to the customer's requirements of packingDelivery Detail:10-20days1.Product discriptionPlace of Origin: Xuzhou ChinaBrand Name: HDItem Type:LED ModulesCertification:CE,RoHSModel Number:MB-PM2801-66color:full 24 bit colorGREEN WIRE: CLOCKBLUE: GroundWorking voltage: DC5VWo
• Contact Person : Kara|||Sale manager
• Telephone :
• Fax :
• Mobile phone :
• Website : http://www.cn-ledstrips.com
• Email : [email protected]
• Update : Aug/27/2016

• Product Details

  Quick DetailsType:LED ModulesEmitting Color:RGBPower:otherColor Temperature:rgbPlace of Origin:Jiangsu, China (Mainland)Brand Name:HDPackaging & DeliveryPackaging Details:1.Good quality carton 2.According to the customer's requirements of packingDelivery Detail:10-20days1.Product discriptionPlace of Origin: Xuzhou ChinaBrand Name: HDItem Type:LED ModulesCertification:CE,RoHSModel Number:MB-PM2801-66color:full 24 bit colorGREEN WIRE: CLOCKBLUE: GroundWorking voltage: DC5VWorking consumption: 0.3WIP grade: IP 66Dimension: 12mmLED type: F8 RGB LEDLED qty: 1PCSLifespan: More than 50000h, 2 years warrantyInput side: is the side with IC12mm diameter (0.45") 75mm deep (1.5")100mm cable between each lights50 pieces per strandWS2801 chip for full 24 bit color2-pin SPI-like protocolWS2801 Datasheet for the chip inside each pixelBrightness: Red = 3.3 Lumens/300 mcd, Green = 10 Lumens/1000 mcd, Blue = 2.7 Lumens/300 mcd (mcd calculation based on full 120 degree beam)RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are waterproof and rugged. There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick. They're typically used to make outdoor signs.Each dot is digitally controlled, with an internal 8-bit PWM LED driver (24-bit color for 16 million different shades). The pixels must be clocked by a microcontroller, we have an example code linked below that works on an Arduino, it should be simple to adapt it to any other microcontroller.The pixels use 8mm diffused RGB LEDs, with a 120 degree beam width. The total max brightness of all LEDs is about 1600mcd but with the light more evenly distributed & mixed than a clear LED.2.Payment Of Terms:T/T,L/C/,D/A,D/P,West Union,Money Gram3.Abou

Company Product

Related Product